Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Modell: IG7
Marke: Brando
Verpakung: Plastiktüte, Box, Karton, Palette
Produktivität: 25000 pcs per month
Transport: Ocean,Land,Air
Ort Von Zukunft: China Ningbo
Unterstützung über: 5000 pcs per week
Zertifikate : CE
Hafen: Ningbo,Guangzhou,Yiwu
Zahlungsart: L/C,T/T,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW
4Cyl IG7 Dakota Navajo Injektorschiene LPG CNG
Die Merkmale des 2 Ohm 4 Zylinder IG7 Dakota RAIL Rail Rail Injector sind wie folgt:
1. Schieneninjektor für gasförmiges Flüssiggas und Erdgas.
2. Einzelversion mit 0,47 mm Hub.
3. Spulen mit 2-Wege-Wasserdichtigkeit, kompatibel mit Amp.
4. Körper aus Aluminium.
5. Gebäudetechnik, die für eine hohe Leistung in Bezug auf Geschwindigkeit und Dauer geeignet ist.
6. Nicht sehr empfindlich gegen Schmutzansammlung.
7. Hohe interne Strömungsstabilität und Wiederholgenauigkeit .
Gesamtabmessung des 2 Ohm 4 Zylinder IG7 Dakota Navajo Rail Injector:
Technische Parameter der RAIL Typ IG7 DAKOTA Lpg / Cng Injektorschiene:
Characteristic | Unit | Value | Note |
Injector Version | N° of cylinders | 2, 3, 4 |
|
Material body and treatment |
|
Aluminum | |
Relative Pressure | Bar (Psi) | From 0.5 to 2.0 (7 to 29) | Working pressure |
4.5 (65) | Max pressure | ||
Rated voltage (at coil) | Volt | 10.8 - 14.4 |
|
Coil type | by encoding | E2 |
|
Resistance | Q | 2 | ± 5% at T= 25° |
Suggested peak current time (duration) | ms | 2.4 |
|
Suggested holding current (±10%) | A | 1.4 |
|
Cold Starting Requirements |
|
Increase up to 20% the "peak current time" for first cycles when gas temperature is < 10°C | |
Complete OPENING Response Time | ms | 1.7 | (±10% - total injection time 5 ms) ± 5% tested without nozzle at 14V Dp=1bar T= 25°C |
Complete CLOSING Response Time | ms | 1.4 |
|
Minimum injection pulse | ms | 1.8 | tested with 2 mm nozzle diameter at 14V Ap=1 bar T= 25°C |
Stroke | Micron | 470 |
|
Seat Diameter | mm | 3.3 |
|
Static flow rate (with max nozzle O) for 1 single injector at 20°C (with air) | SLPM (sL/min) | 115 | at 1 bar inlet pressure |
170 | at 2 bar inlet pressure | ||
Leakage (tested with air) | cc/h | < 15 |
|
Noise level | dB | T.B.D | ±1 dB Rail Test Condition |
Compatibility with gas |
|
LPG, CNG |
|
Driver Stage |
|
Peak and Hold (PWM) |
|
Coil Connector type |
|
2 way Amp super seal fermale connector with tab contacts | About connecting wire, refer to our drawing, code 114.01.AMP.001 |
Inlet gas fitting for rubber hose | mm | φ10 mm, φ12 mm, φ14 mm, φ16 mm | |
Outlet gas fitting |
|
Calibrated nozzles M8x1 for rubber hose φ4 mm - φ5 mm - φ6 mm | |
Calibrated hole φ range (for nozzles) | φ | From 1.00 to 3.25 mm (0.25 mm step) |
|
Approvals |
|
110R-00 67R-01 (-40°C to +120°C) |
|
Principle of operation |
|
Solenoid valve, Normally closed, Mobile Plunger | |
Power handling capability LPG | HP/cyl | 1 bar up to 40 HP/cyl | |
Power handling capability CNG | HP/cyl | 2 bar up to 35 HP/cyl | |
Coil IP Rating |
|
IP54 |
|
Verpackungsausstellung des Rail Type 2 Ohm 4 Zylinder IG7 Dakota Rail Injector:
Gebrauchsanweisung:
1. Es wird empfohlen, einen Filter am vorderen Ende des Einspritzrohrs der Sprühschiene anzubringen, um die Verunreinigungen in der Luftleckage effektiv durchzulassen.
Verhindern Sie das Eindringen von Verunreinigungen und feinen Partikeln in die Schienenschiene und tauschen Sie den Filter drei Monate oder 20.000 Kilometer lang aus.
2. Um die bestmögliche Verwendung zu gewährleisten, wird empfohlen, die Schiene so weit wie möglich in einem vertikalen Winkel zu installieren.
3. Je nach Modell der Sprühschiene muss in der Einstellung der elektrischen Steuerung der entsprechende Sprühschienentyp ausgewählt werden.
4. Je nach Leistung des Motors müssen Sie den geeigneten Düsendurchmesser auswählen.
Konzentrieren Sie sich auf Ihre Anforderungen und bieten Sie die beste Lösung:
√ Kontaktieren Sie uns, wenn Sie Zweifel haben
√ Kontaktieren Sie uns, wenn sich etwas ändern muss
√ Kontaktieren Sie uns, wenn nicht die, die Sie suchen
√ Kontaktieren Sie uns, wenn Sie entwerfen
Willkommen bei jeder Frage und Anfrage!
Produktgruppe : LPG CNG Injektorschiene
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.